What rounding method is used in the REAL_TO_INT results for M580 and Quantum?
If you compare the REAL_TO_INT with an M580 and Quantum, you will see some differences.
For example:
Quantum 2.5 = 2
M580 2.5 = 3
The M580 uses the method called "round to nearest, ties away from zero".
The Quantum uses the method called "round to nearest, ties to even" (as described in ControlExpert help).
The following table shows an example:
These two methods can be found in the IEEE 754 (IEC 559).
For example:
Quantum 2.5 = 2
M580 2.5 = 3
The M580 uses the method called "round to nearest, ties away from zero".
The Quantum uses the method called "round to nearest, ties to even" (as described in ControlExpert help).
The following table shows an example:
| Mode | 11.5 | 12.5 | -11.5 | -12.5 |
| to nearest, ties to even | 12 | 12 | -12 | -12 |
| to nearest, ties away from zero | 12 | 13 | -12 | -13 |
These two methods can be found in the IEEE 754 (IEC 559).
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.