Issue:
Events logged for host shutdown and maintenance mode are disappearing after a PowerChute restart.
Products:
PowerChute Network Shutdown v4.3 and 4.4.2
Note: We recommend installing PowerChute version 4.4.3, configuring it, and then discontinuing the use of the older version. PowerShell and the PowerCLI have been preinstalled on PowerChute version 4.4.3, so when reviewing the script instruction, you can skip to the section to download settings.txt, disable_HA.ps1, and enable_HA.ps1 files.
Environment:
VMware vSphere 7U1 and above with vCenter Server 7U1 and above.
Cause:
Hard shutdown of PowerChute Network Shutdown Appliance when the host goes down.
Solution:
When the PowerChute Network Shutdown appliance is on the local datastore.
Enable automatic startup and shutdown for the PowerChute Network Shutdown appliance and set shutdown behavior to Guest Shutdown with a 120-second delay.
Configure PowerChute Network Shutdown with the attached scripts (enable_HA and disable_HA). Please follow the instructions in the attached PDF (HA_ScriptInstructions).
NOTE: If vSphere Cluster Services (vCLS) is enabled on the cluster, the attached script will handle vCLS VMs as well. For more information on using the script for vCLS, refer to KBase article FA416409.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.
