The goal of this article is to explain How to use the Network Configurator tool on an HMI BSC.
This article is applicable for HMI BSC boxrunning on Yocto Linux (example: HMIBSCEA53D1L0T)
OS: Yocto Linux SE build V1.00.012 or higher (SV: 3.0 or higher)
The BSC Network Configurator is a Web Interface to remotely configure the network interfaces of an HMI BSC box.
The BSC Network Configurator resolves two pain points:
- The need to connect keyboard and screen to the box to configure it
- The complexity of configuring the network interfaces by modifying Linux configuration file
Please find the document attached.
This article is applicable for HMI BSC boxrunning on Yocto Linux (example: HMIBSCEA53D1L0T)
OS: Yocto Linux SE build V1.00.012 or higher (SV: 3.0 or higher)
The BSC Network Configurator is a Web Interface to remotely configure the network interfaces of an HMI BSC box.
The BSC Network Configurator resolves two pain points:
- The need to connect keyboard and screen to the box to configure it
- The complexity of configuring the network interfaces by modifying Linux configuration file
Please find the document attached.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.
