What conditions are needed to set %S51?
The initial value of %S51 is 1 (after a factory reset), meaning that the RTC has not been set. After the first successful write to the real-time clock (RTC) with valid data, %S51 will be set to 0.
One of the following conditions must be true in order for %S51 to be set to 1:
- Hardware RTC is not present
- Hardware RTC is not readable or writeable
- Hardware RTC has never been updated
- Hardware RTC contains an invalid date/time (ex. 31 February)
- Hardware RTC does not update correctly from second to second or is just frozen
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.