Issue:
How do I start-up/turn on BE900G3 and BE1050G3?
Product Line:
BE900GE and BE1050GE
Environment:
All Serial Numbers
Steps / Procedures:
1. Connect the internal battery (The Back UPS is shipped with one battery cable disconnected).
Follow the series of steps stated below:
2. And when the battery is connected successfully, plug it into the Utility or AC main source.
3. Press the POWER button. It will illuminate green, and a single short beep indicates that the Backups is on and helping to provide protection for connected equipment.
Additional inputs:
* Self-Test only occur upon start up.
* Intentional manual self-test is not applicable for this particular product.
* Battery replacement for Backups BE900G3 is RBC17 and BE1050G3 is APCRBC164.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.
