How to Use the Secure NMC System Tool for the Network Management Card

Issue:
How to Use the Secure NMC System Tool

Cause:
Users wish to upgrade their Network Management Card 3 (NMC3) firmware

Product Line:
Network Management Card 3 (NMC3) - AP9640, AP9641, AP9643
Devices with an embedded Network Management Card 3 include (but are not limited to): Smart-UPS Online (SRT), Smart-UPS Ultra, Smart-UPS Modular Ultra, Metered/Switched Rack PDUs (AP71XXB, AP78XXB, AP79XXB, AP84XX, AP86XX, AP88XX, AP89XX, APDU99XX), Advanced Rack PDUs (AP10XX with the APDU9640NMC3 display, AP11XX)

Solution:.
Videos on using the SNS tool can be found here: https://fast.wistia.com/embed/channel/a2imaik0y2

For more information about the Secure NMC System Tool, please visit www.apc.com/secure-nmc

Should there be any further concerns, please contact our Customer Care Center at https://www.apc.com/us/en/support/

Udgivet til: Schneider Electric Danmark