IGP10-T 4 and 20 mA Loop Check
- Press the NEXT button 3 times and CALIB will be displayed
- Press ENTER and CAL ATO will be displayed
- Press NEXT 3 times and ADJ 4mA will be displayed
- Press ENTER and A 4mAΔΔ will be displayed. At this time the transmitter output will be locked at 4mA.
- When 4mA loop check is done, press NEXT 5 times and ADJ20mA will be displayed
- Press ENTER and A20mAΔΔ will be displayed. At this time the transmitter output will be locked at 20mA.
- When 20mA loop check is done, press NEXT 6 times and CANCEL will be displayed
- Press ENTER and transmitter will return to measurement mode.
Udgivet til: Schneider Electric Danmark
Discontinued
Discontinued
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.