NetBotz logging level reset to "Warning" after 5.5 upgrade
Issue:
NetBotz logging level reset to "Warning" after 5.5 upgrade
Product Line:
NetBotz
Environment:
NBRK0750
NBWL0755
Upgrade to Firmware Version 5.5
Cause:
By design, upgrading NetBotz to version 5.5 will cause logging levels to be switched to "Warning" no matter what the previous setting was.
Resolution:
Due to additional logging information that may be stored locally or be sent to a Syslog server, it was decided to set logging to warning so there would not be too much information logged.
If a different level is required, you will have to change it back to the previous setting manually after upgrade.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.