How to Configure Firewall Rules on SAGE RTU
Issue:
Need to secure network traffic by applying firewall rules on the RTU.
Product:
SAGE RTU with Config@WEB Secure Software
Environment:
- Firmware version C3414-500-S02YZ or later
- Access to Config@WEB GUI
Cause:
Unrestricted network access can expose the RTU to cybersecurity risks.
Resolution:
- Navigate to CPU Configuration → Configure Firewall.
- Click Configure Firewall button.
- Enter firewall rules using the syntax described in the Firewall Configuration Guide: "Wind River Firewall and NAT PROGRAMMER'S GUIDE 6.8" available at: https://www.windriver.com/
- Submit changes and reset the RTU for rules to take effect.
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.