Hvordan kan vi hjælpe dig i dag?

BCIM Functionality Requirements with Micrologic Active

Make sure to use EPC 2.39 or above to upgrade Micrologic Active trip unit toFirmware version 004.004.003 or later

What happens if the Micrologic Active firmware is not updated?

You may experience issues such as:

BCIM not appearing in the EPC
Incorrect or missing measurement data
Communication errors on the trip unit

Note : Ensure 24V auxiliary supply provided to BCIM separately through the 6-Pin COM port.

Udgivet til: Schneider Electric Danmark

Udgivet den:2.3.2026Senest ændret den:2.3.2026