How do I setup Modbus serial communication between two Ecostruxure Machine Expert controllers using the Read_Var function block?
Issue:
How to setup Modbus serial communication between two Ecostruxure Machine Expert controllers using the Read_Var function block
Product Line:
Ecostruxure Machine Expert
Resolution:
In this example, the M251 is setup a Modbus Slave and the M262 as Master. Ensure that both devices serial line settings are identical
Below is the logic where the blink function is used to execute the read every second. The address table variable of the ADDM block must be used as the address(Addr pin) of the READ_VAR block. Attached is the sample project created in Ecostruxure Machine Expert V2.3
Udgivet til: Schneider Electric Danmark
Brug for hjælp?
Produktvælger
Find hurtigt og nemt de rette produkter og det rette tilbehør til dine anvendelser.
Få et tilbud
Start din salgsforespørgsel online, så vil du blive kontaktet af en ekspert.
Find forhandler
Find den nærmeste Schneider Electric-distributør.
Hjælpecenter
Find supportressourcer til alle dine behov på ét sted.