Welcome to the Schneider Electric Website

Welcome to our website.

Select your location

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
View all   OsiSense XU
XUK9LAPSMM12 Product picture Schneider Electric

XUK9LAPSMM12

XUK9LAPSMM12 Product picture Schneider Electric
XUK9LAPSMM12

photo-electric laser sensor - XUK - polarised reflex - Sn 14m - 10..30VDC - M12

Show more characteristics
The maximum number of products that can be compared is 4. Remove already added products.

  • Main
    range of product
    Telemecanique Photoelectric sensors XU
    series name
    Application assembly
    Application material handling
    electronic sensor type
    Photo-electric sensor
    sensor name
    XUK
    sensor design
    Compact 50 x 50
    detection system
    Polarised reflex
    material
    Plastic
    type of output signal
    Discrete
    supply circuit type
    DC
    wiring technique
    4-wire
    discrete output type
    PNP
    discrete output function
    1 NO or 1 NC programmable
    electrical connection
    1 male connector M12, 4 pins
    product specific application
    -
    emission
    Red laser polarised reflex class 1
    [Sn] nominal sensing distance
    12 m polarised reflex need reflector XUZC50HP
    Complementary
    enclosure material
    ABS/PC
    lens material
    PMMA
    maximum sensing distance
    14 m polarised reflex need reflector XUZC50HP
    output type
    Solid state
    status LED
    1 LED (yellow) for output state
    1 LED (green/yellow) for supply on/output state
    [Us] rated supply voltage
    24 V DC with reverse polarity protection
    supply voltage limits
    10…30 V DC
    switching capacity in mA
    <= 100 mA (overload and short-circuit protection)
    switching frequency
    <= 2000 Hz
    maximum voltage drop
    <2 V
    current consumption
    <= 60 mA no-load
    maximum delay first up
    300 ms
    maximum delay response
    2 ms
    maximum delay recovery
    2 ms
    setting-up
    Using teach button or remote teaching