Issue:
Asking about parameter F400 on the ATV212.
Product Line:
Altivar 212, Altivar 21
Environment:
All Serial numbers
Cause:
N/A
Resolution:
F400 is the auto tuning parameter for the ATV212 and the ATV21. The setting for the parameters are listed below:
0 [Deactivated]
1 [Initialize constant] Auto-tuning is performed immediately if possible. Application of individual settings of Auto Torque Boost [Auto
Torque Boost] (F402)
2 [Complete tune] Complete auto tuning.
Parameter F400 is reset to “0” after the auto tuning is performed.
Asking about parameter F400 on the ATV212.
Product Line:
Altivar 212, Altivar 21
Environment:
All Serial numbers
Cause:
N/A
Resolution:
F400 is the auto tuning parameter for the ATV212 and the ATV21. The setting for the parameters are listed below:
0 [Deactivated]
1 [Initialize constant] Auto-tuning is performed immediately if possible. Application of individual settings of Auto Torque Boost [Auto
Torque Boost] (F402)
2 [Complete tune] Complete auto tuning.
Parameter F400 is reset to “0” after the auto tuning is performed.
Released for: Schneider Electric Hong Kong
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales enquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.
