For PME 7.2.2 and PME versions prior to 7.2, WebReach requires an additional configuration step if the power system is not 60Hz (for example, 50Hz). To do this, a user needs add or modify the registry key “LineFrequency” under the WebReach subdirectory of PME. This key should be assigned a DWORD value of 50(or 0x32 hex) in the case of a 50Hz system. This value will then be used by WebReach in the calculation of the RMS plot.
Taking PME7.2.2 for example,
Taking PME7.2.2 for example,