Users wish to downgrade firmware from v2.x+ to v1.x
Product Line:
Network Management Card 3 - Including (but not limited to) AP9640/41/43
Environment:
NMC3's with firmware v2.x+
Cause:
NMC firmware v2.x provides support for new TI PHY hardware. Older versions of the firmware (v1.6.x and below) will not work with the new hardware. Firmware version 2.0.x and higher works with the old hardware.
Solution:
Once upgrading to v2.x+, it is no longer possible to downgrade back to v1.x.
Released for: Schneider Electric Hong Kong
Users wish to downgrade firmware from v2.x+ to v1.x
Product Line:
Network Management Card 3 - Including (but not limited to) AP9640/41/43
Environment:
NMC3's with firmware v2.x+
Cause:
NMC firmware v2.x provides support for new TI PHY hardware. Older versions of the firmware (v1.6.x and below) will not work with the new hardware. Firmware version 2.0.x and higher works with the old hardware.
Solution:
Once upgrading to v2.x+, it is no longer possible to downgrade back to v1.x.
Released for: Schneider Electric Hong Kong




Need help?
Start here!
Find answers now. Search for a solution on your own, or connect with one of our experts.
Contact Support
Reach out to our customer care team to receive more information, technical support, assistance with complaints and more.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Search FAQs
Search topic-related frequently asked questions to find answers you need.
Contact Sales
Start your sales enquiry online and an expert will connect with you.