The XMPN12C2541C038 was a special item made for the UK market that is now obsolete.
It was pre-set in the factory to PH (high point) = 10 bar, PB (low point) = 7.5 bar and it had a cable entry for cables with diameter between 9..12mm.
Unfortunately, there is not a like for like alternative available as we don't offer a pre-set version anymore.
A possible indirect alternative would be the XMPE12* offer. You can find details regarding this offer here:
https://digicat.se.com/
Either use the product selector (along the top ribbon) or find the catalogue under 'Sensors & RFID System'
It was pre-set in the factory to PH (high point) = 10 bar, PB (low point) = 7.5 bar and it had a cable entry for cables with diameter between 9..12mm.
Unfortunately, there is not a like for like alternative available as we don't offer a pre-set version anymore.
A possible indirect alternative would be the XMPE12* offer. You can find details regarding this offer here:
https://digicat.se.com/
Either use the product selector (along the top ribbon) or find the catalogue under 'Sensors & RFID System'
Released for:Schneider Electric Ireland
