User guideLanguageFormatSizeDateEnglishprp.document.label.format pdfSize 4.2 MBDate 01/08/12DescriptionThe PM8ECC is a communications add-on module for the Series 800 PowerMeter that provides connectivity between Ethernet (Modbus TCP/IP) andserial line devices, allowing Modbus TCP/IP clients to access informationfrom the host Power Meter and the serial slave devices.
Software - ReleaseLanguageFormatSizeDateEnglishprp.document.label.format zipSize 20.2 MBDate 30/11/11DescriptionThe Download Firmware Upgrade Utility (DLF3000) is a tool used to install the latest firmware version for your POWERLOGIC or POWERLINK device. After downloading DLF-3000 v3_3 v2.exe, do the following to install DLF3000: 1.Uninstall earlier versions of DLF. 1a.On your Windows taskbar, click Start > Settings > Control Panel. 1b.Click the Add/Remove Programs icon. Select the DLF program and remove it. 2.Navigate to the folder DLF-3000 v3_3 v2.exe is located, then double-click the file and follow the setup wizard. 3.When the installation is complete, reboot your PC.Englishprp.document.label.format zipSize 1.2 MBDate 08/04/08Files in document119.6 KBfw238 KB63.4 KBfw812 KBDescription"The history pdf file shows a summary of changes incorporated in each production firmware release for the Series 800 Power Meter.Below is the latest revision of the firmware for the Series 800 Power Meter. Both, the DL and the OS portions of the firmware need to be updated.1 - Using DLF 3000, download DL 10.510 to the device2 - Download OS 10.5303- After the download is completed, you will see the meter resetting.4- You can verify the new firmware version selecting MAINT -> DIAG -> METER from the main menu.Note that if you are upgrading a meter that has firmware older than v10.410 and you are adding a remote display, the firmware download must use the standard communication port (2-wire RS485)."