Issue:
Cause of fault relay not changing state after the external fault is activated on the ATV630.
Product Line:
ATV630 and ATV930
Environment:
All
Cause:
The auto restart is preventing the relay from changing until the timeout is over.
Resolution:
The auto restart will prevent the fault relay from turning on until after the auto start time delay.
Cause of fault relay not changing state after the external fault is activated on the ATV630.
Product Line:
ATV630 and ATV930
Environment:
All
Cause:
The auto restart is preventing the relay from changing until the timeout is over.
Resolution:
The auto restart will prevent the fault relay from turning on until after the auto start time delay.
פורסם עבור: שניידר אלקטריק ישראל
