How to setup Initial values for PLC Tags from HMI
Issue:
Looking for a way to initialize PLC variables with values from the HMI.
Product Line:
Vijeo Designer (all versions)
Resolution:
To set an initial value for your PLC tag, you could define an On Startup action from your HMI to set the values.
The action should use the Word-set Operation as shown in the screen shot below.
Looking for a way to initialize PLC variables with values from the HMI.
Product Line:
Vijeo Designer (all versions)
Resolution:
To set an initial value for your PLC tag, you could define an On Startup action from your HMI to set the values.
The action should use the Word-set Operation as shown in the screen shot below.
פורסם עבור: שניידר אלקטריק ישראל
זקוק לעזרה?
בורר מוצרים
חפשו ברשת מפיצים מאומתים עם יותר מ-15,000 נקודות מכירה ברחבי העולם.
קבלת הצעת מחיר
התחילו את בקשת הקניה בצורה מקוונת ונציג מכירות ייצור עמכם קשר.
היכן לקנות?
אתר בקלות את מפיץ Schneider Electric הקרוב ביותר אליך.
מרכז העזרה
חפשו משאבי תמיכה לכל הצרכים שלכם במקום אחד.