How to configure AFDD ( Arc fault Detection Device) in Ecostruxure power design-Ecodial?

In Ecodial, Below are the steps to configure AFDD.
Step-1

• Create the network
• Ensure that the AFD is getting used in 50HZ & Single phase network and up to 25A (NL) & 40A (FR) only for final loads

Step-2

• Select the Circuit breaker in the Feeder
• Enable the AFD

Step-3

• Run the calculation for the automatic selection of the AFD

Step 4

• For manual selection of AFD, Click on it
• Select AFD selection tab for more options

Step 5

• Check the specification and validate as per requirement

Step 6

• Run the calculation

Step 7

• The Feeder is successfully incorporated with AFDD.

פורסם עבור: שניידר אלקטריק ישראל