To get the most information regarding logs, we need to have the system in verbose mode.
To provide the diagnostic file, you need to configure the path where the logs will be stored.
Open the OPCUA configuration tool, in the “setting” tab, click on “diagnostic” and then give the location path and select “Verbose” mode :
To provide the diagnostic file, you need to configure the path where the logs will be stored.
Open the OPCUA configuration tool, in the “setting” tab, click on “diagnostic” and then give the location path and select “Verbose” mode :
פורסם עבור: שניידר אלקטריק ישראל
