Issue:
Customer has a ATS480 and when it is powered up it shows “Welcome to Schneider” boot up screen. They state it takes about 8 seconds for the Soft start to boot up and
it’s unacceptable for their process. Any way to reduce the start-up process?
Product Line:
ATS480
Environment:
Boot up time
Cause:
n/a
Resolution:
The ATS480 have a software and hardware control that is different compared to ATS48.
After a power on of Control voltage (CL1-CL2), the starter needs about 6.5 secs for the wake up.
The reason the boot time is higher on ATS480:
The flash memory is larger and there is a increase in the time of the initialization of the file system.
ATS480 embeds a secure boot and the firmware integrity check time is significant.
Unfortunately, there is not a way to reduce this time.
פורסם עבור: שניידר אלקטריק ישראל
Issue:
Customer has a ATS480 and when it is powered up it shows “Welcome to Schneider” boot up screen. They state it takes about 8 seconds for the Soft start to boot up and
it’s unacceptable for their process. Any way to reduce the start-up process?
Product Line:
ATS480
Environment:
Boot up time
Cause:
n/a
Resolution:
The ATS480 have a software and hardware control that is different compared to ATS48.
After a power on of Control voltage (CL1-CL2), the starter needs about 6.5 secs for the wake up.
The reason the boot time is higher on ATS480:
The flash memory is larger and there is a increase in the time of the initialization of the file system.
ATS480 embeds a secure boot and the firmware integrity check time is significant.
Unfortunately, there is not a way to reduce this time.
פורסם עבור: שניידר אלקטריק ישראל
זקוק לעזרה?
התחל כאן!
מצא תשובות כעת. חפש פתרון בעצמך או פנה אל אחד המומחים שלנו.
פניה למחלקת התמיכה
פנה לצוות שירות הלקוחות שלנו לקבלת מידע נוסף, תמיכה טכנית, סיוע בתלונות ועוד.
היכן לקנות?
אתר בקלות את מפיץ Schneider Electric הקרוב ביותר אליך.
גלוש ב'שאלות נפוצות'
עיין בשאלות הנפוצות לפי נושאים וקבל את התשובות שאתה מחפש.
