Follow below steps to reset the CPU application password without .STU file:
1 Condition: At connection time, the Password dialog box is displayed.
2 Press SHIFT+F2.
Result: A grayed number is displayed in the right side of the Password dialog box.
3 Give this number to Schneider Electric support along with a Authorization Letter to provide temporary Password.
4 Receive the generated password from Schneider Electric support.
Note: The password provided by Schneider Electric support is a temporary password, available as long as the application is not modified.
5 Enter this password.
6 Upload the application from CPU.
7 Save the application.
8 Modify the password (old password = the one provided by Schneider Electric support).
9 Click Build → Build Changes.
10 Save the application.
1 Condition: At connection time, the Password dialog box is displayed.
2 Press SHIFT+F2.
Result: A grayed number is displayed in the right side of the Password dialog box.
3 Give this number to Schneider Electric support along with a Authorization Letter to provide temporary Password.
4 Receive the generated password from Schneider Electric support.
Note: The password provided by Schneider Electric support is a temporary password, available as long as the application is not modified.
5 Enter this password.
6 Upload the application from CPU.
7 Save the application.
8 Modify the password (old password = the one provided by Schneider Electric support).
9 Click Build → Build Changes.
10 Save the application.
Released for:Schneider Electric India
