Follow below steps to connect STBNIP2311 with Advantys software over serial port.
1. Open the Advantys and create new project.
2. Right click on island name and build the configuration.
3. Go to online > Connection settings.
4. Select the connection type as serial and select the correct com port which is showing in device manager.
5. Click on auto detection button and then apply.
6. Go to online > Click connect > Click on upload option to start the upload..
1. Open the Advantys and create new project.
2. Right click on island name and build the configuration.
3. Go to online > Connection settings.
4. Select the connection type as serial and select the correct com port which is showing in device manager.
5. Click on auto detection button and then apply.
6. Go to online > Click connect > Click on upload option to start the upload..
Released for:Schneider Electric India
Did this answer your question?
