Main range of productAltistart 22 product or component typeSoft starter product destinationAsynchronous motors product specific applicationPumps and fans component nameATS22 network number of phases3 phases [Us] rated supply voltage230...440 V - 15...10 % motor power kW4 kW 230 V7.5 kW 400 V7.5 kW 440 V factory setting current14.8 A power dissipation in W39 W for standard applications utilisation categoryAC-53A type of startStart with torque control (current limited to 3.5 In) IcL starter rating17 A for connection in the motor supply line for standard applications IP degree of protectionIP20 Complementary assembly styleWith heat sink function availableInternal bypass supply voltage limits195…484 V supply frequency50...60 Hz - 10...10 % network frequency45...66 Hz device connectionIn the motor supply lineTo the motor delta terminals [Uc] control circuit voltage230 V - 15...10 % 50/60 Hz control circuit consumption20 W discrete output number2 discrete output typeRelay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/ORelay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O minimum switching current100 mA at 12 V DC (relay outputs) maximum switching current5 A 250 V AC resistive 1 relay outputs5 A 30 V DC resistive 1 relay outputs2 A 250 V AC inductive 0.4 20 ms relay outputs2 A 30 V DC inductive 7 ms relay outputs discrete input number3 discrete input type(LI1, LI2, LI3) logic, 5 mA 4.3 kOhm discrete input voltage24 V <= 30 V discrete input logicPositive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA output current0.4...1 Icl adjustable PTC probe input750 Ohm communication port protocolModbus connector type1 RJ45 communication data linkSerial physical interfaceRS485 multidrop transmission rate4800, 9600 or 19200 bps installed device31 protection typePhase failure: lineThermal protection: motorThermal protection: starter markingCE type of coolingForced convection operating positionVertical +/- 10 degree height265 mm width130 mm depth169 mm net weight7 kg Motor power range AC-34…6 kW at 200…240 V 3 phases7…11 kW at 380…440 V 3 phases motor starter typeSoft starter Environment electromagnetic compatibilityConducted and radiated emissions level A conforming to IEC 60947-4-2Damped oscillating waves level 3 conforming to IEC 61000-4-12Electrostatic discharge level 3 conforming to IEC 61000-4-2Immunity to electrical transients level 4 conforming to IEC 61000-4-4Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3Voltage/current impulse level 3 conforming to IEC 61000-4-5 standardsEN/IEC 60947-4-2 product certificationsULGOSTCSACCCC-Tick vibration resistance1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-61.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6 shock resistance15 gn for 11 ms conforming to EN/IEC 60068-2-27 noise level45 dB pollution degreeLevel 2 conforming to IEC 60664-1 relative humidity0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 ambient air temperature for operation-10…40 °C (without)40…60 °C (with current derating 2.2 % per °C) ambient air temperature for storage-25…70 °C operating altitude<= 1000 m without> 1000...< 2000 m with current derating of 2.2 % per additional 100 m Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation REACh free of SVHCYes EU RoHS DirectiveNot applicable, out of EU RoHS legal scope Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueSizeAdd to My DocumentsUser guideSizeAdd to My DocumentsCADSizeAdd to My DocumentsCAD file (on TraceParts) for ATS22D17Q: soft starter-ATS22-control 220V-power 230V(4kW)/400...440V(7.5kW) (Version 2.0)CertificateSizeAdd to My Documents
Software and FirmwareLanguage
Software - ReleasedSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.