Issue:
Flashing RUN light indication on a TSX Micro PLC
Product Line:
TSX Micro
Resolution:
A flashing RUN light on the TSX Micro PLC indicates that the PLC is in STOP mode. To initiate a run command, you will need the programming software and cable to connect to the PLC.
If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Support | Schneider Electric Global (se.com)
