In Vijeo Designer, we must make use of two objects to animate a switch that stays down while the bit is high and that is also able to reset the bit when touching it.
We make use of:
1) A radio button (to set the bit and to stay down when the bit is high)
2) An invisible switch to be used to reset the bit. The switch has a visibility condition to only appear when the bit is high.
Please see the following video for a demonstration of this procedure:
If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Released for: Schneider Electric Macedonia
