Browse FAQs

ATV61 and ATV71 basic integrated modbus setup assistance?

Published date: 28 July 2020

Need ATV61 and ATV71 basic intergrated modbus setup assistance.

Product Line:
ATV61 and ATV71 standard internal modbus


Basic modbus setup assistance. 

Programming: Menu 1.9
Modbus Network
Add- address set to 1 to 247
tbr= modbus baud rate choose 4.8, 9.6, 19.2 or 38.4K
tFO=Modbus format choose 8O1, 8E1, 8N1 or 8N2
ttO= modbus timeout set between 0.1 to 30 seconds.

You must now power cycle the drive and wait until the display goes out and then you can power it back up again after you change any of the modbus settings.

Wiring is pins 4 and 5 for data + and - and pin 8 for com 
The wiring connection is a RJ45


Was this helpful?

What can we do to improve the information ?

Can't find what you are looking for?

Reach out to our customer care team to receive information on technical support, assistance for complaints and more.