How to configure the STBEHC3020 for event counting | Schneider Electric New Zealand

0 item count of documents is

My Products Item count in basket is 0 My Documents Item count in basket is 0

How can we help you today?

How to configure the STBEHC3020 for event counting

Issue
How to configure the EHC3020 for event counting.

Product Line
All versions of the Advantys Configuration Software.

Environment
Windows 7

Resolution
Wire the 'EHC3020' to the incremental encoder.
c zc
xcz c

Double click on the 'EHC3020' module to open the properties window for the module.

zxc c

Configure the parameters as shown.

· Download the application to the island.
czx

czx

Start the PLC.

· Place the PLC into test mode.
zx c

zx c

Set the Input Validation bits to Off.

cxa

Set the Counter Enable to On.

Released for: Schneider Electric New Zealand

Published on:28/09/2009Last Modified on:28/02/2025

Range:

Modicon STB

Interface Cables

PowerChute Business Edition

PowerChute Network Shutdown

PowerChute Personal Edition

Range:

Modicon STB

Interface Cables

PowerChute Business Edition

PowerChute Network Shutdown

PowerChute Personal Edition