power supply module Modicon Quantum - 24 V DC 20..30 V - redundantShow more characteristics >
Main range of productModicon Quantum automation platform product or component typePower supply module power supply typeRedundant Complementary input voltage24 V (20...30 V) DC input current3800 mA inrush current14 A 20 V25 A 24 V maximum input power interruption100 ms1 ms 20 V associated fuse rating5 A, slow-blow output voltage5.1 V DC power supply output current8 A redundant output overvoltage protectionInternal output overload protection2.3 x maximum rated input voltage for 1.3 ms power dissipation6 + (1.8 x Iout) where Iout is in A alarm output1 NC 6 A 220 V power supply fault local signallingPower (PWR OK): 1 LED (green) markingCE module formatStandard net weight0.65 kg Environment protective treatmentConformal coating Humiseal 1A33 standardsUL 508CSA C22.2 No 142 product certificationsCULFM Class 1 Division 2 resistance to electrostatic discharge4 kV contact conforming to IEC 801-28 kV on air conforming to IEC 801-2 resistance to electromagnetic fields10 V/m 80…2000 MHz conforming to IEC 801-3 ambient air temperature for operation0…60 °C ambient air temperature for storage-40…85 °C relative humidity95 % without condensation operating altitude<= 5000 m Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
Documents & DownloadsLanguage
CatalogueSizeAdd to My DocumentsUser guideSizeAdd to My DocumentsCADSizeAdd to My DocumentsCAD for 140CPS22400C: power supply module Modicon Quantum - 24 V DC 20..30 V - redundant (Version 1.0)CertificateSizeAdd to My DocumentsATEX-IECEx (Version 1.0)CLASS - C225351 - PROGRAMMABLE CONTROLLER,CLASS - C225802 - PROCESS CONTROL EQUIPMENT-For Hazardous Locations (Version 1.0)Declaration of conformitySizeAdd to My DocumentsEnd of Life InformationSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsRacks for Modules MountingDimensions of Modules and Racks(1)2 slots(2)3 slots(3)4 slots(4)6 slots(5)10 slots(6)16 slots
Connections and Schema24 Vdc/8 A Redundant Power Supply ModuleWiring Diagram and Hold-up Capacitor Timing Chart
NOTE: A normally closed relay contact rated at 220 Vac, 6A / 30 Vdc, 5A is available on terminals 1 and 2 of the power terminal strip. This contact set may be used to signal input power OFF, or a power supply failure. The relay will de-energize when input power drops below 8 Vdc.