Specification Requirements For us to identify the correct Residual Current Circuit Breaker (RCCB), we will be needing the following information: -No of poles: -Earth Leakage Sensitivity: -Ampere...

Title Upgrading M340 BMXNOE0100 module Issue BMXNOE0100 SD memory card upgrade process Product Line M340 Environment Unity Pro, Control Expert Resolution The procedure is for M340 BMXNOE0100 modules...

IEM3000 Series: More than a stand-alone kWh metre, Acti 9 iEM3000 energy metres provide extensive real-time measurements and insights into energy consumption to enable cost management applications...

Yes, the following meters: EasyLogic™ PM2000 Power Meters , PowerLogic™ PM5000 Power Meters PowerLogic™ PM8000 Power Quality Meters PowerLogic ION9000 All have bi-directional energy measurement...

What is Modbus? Modbus is a serial communication protocol developed by Modicon published by Modicon® in 1979 for use with its programmable logic controllers (PLCs). In simple terms, it is a method...

Utilization categories According to IEC 60947-2, Utilization category of a circuit breaker shall be stated with reference to whether or not it is specifically intended for selectivity by means of an...

Issue This document attempts to explain correct methods of wiring RS485 communication networks in industrial environments based on various application notes and technical articles. Environment RS485...

Issue: I require the Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) for various APC single phase UPS products. Product Line: All APC Single phase UPS Environment: All APC UPS Cause: The...

There is often confusion between the in-phase and the In-sync features of ASCO transfer switches. It is important to understand the difference between these features especially during the process of...

The selection should be done after derating the Circuit Breaker taking into consideration voltage variation and capacitors tolerances that could increase nominal current up to 1.5In. The Derating...