ATV630 Why am I getting Motor Short circuit fault when switching STOA or STOB with an external power supply?
Issue:
ATV630 -getting Motor Short circuit fault when switching STOA or STOB, with an external power supply.
Product Line:
ATV630 process drive.
Environment:
All models and serial numbers with firmware revision below 1.3IE07
Cause:
Firmware issue.
Resolution:
This situation was verified as a problem with the drive firmware and was repaired with firmware release V1.3IE07. If you have a 630 process drive with firmware below V1.3IE07, upgrading the firmware will correct this problem.
ATV630 -getting Motor Short circuit fault when switching STOA or STOB, with an external power supply.
Product Line:
ATV630 process drive.
Environment:
All models and serial numbers with firmware revision below 1.3IE07
Cause:
Firmware issue.
Resolution:
This situation was verified as a problem with the drive firmware and was repaired with firmware release V1.3IE07. If you have a 630 process drive with firmware below V1.3IE07, upgrading the firmware will correct this problem.
Released for: Schneider Electric Thailand
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.