Issue:
Using "+/- Speed Around a Reference" on the ATV61 or ATV71 drive.
Product Line:
ATV61, ATV71
Environment:
All models and serial numbers
Cause:
NA
Resolution:
+/- Speed Around a Reference is a way to adjust the motor speed above or below a given Speed reference. One application for Speed Around Reference is to run a secondary conveyor belt above or below the speed of a primary conveyor belt with a single speed reference going to both drives. It may be a case where two conveyor belts are feeding a single conveyor. The single conveyor may need to run at a slightly higher speed to keep product moving. See the ATV61 or ATV71 programming manual for details.
Using "+/- Speed Around a Reference" on the ATV61 or ATV71 drive.
Product Line:
ATV61, ATV71
Environment:
All models and serial numbers
Cause:
NA
Resolution:
+/- Speed Around a Reference is a way to adjust the motor speed above or below a given Speed reference. One application for Speed Around Reference is to run a secondary conveyor belt above or below the speed of a primary conveyor belt with a single speed reference going to both drives. It may be a case where two conveyor belts are feeding a single conveyor. The single conveyor may need to run at a slightly higher speed to keep product moving. See the ATV61 or ATV71 programming manual for details.
Yayımlanma amacı: Schneider Electric Turkey
Yardıma mı ihtiyacınız var?
Ürün seçici
Uygulamalarınız için doğru ürünleri ve aksesuarları hızlı ve kolay bir şekilde bulun.
Teklif Alın
Satışla ilgili sorularınızı çevrimiçi olarak başlatın, bir uzman sizinle bağlantı kuracaktır.
Satış noktaları
Konumunuza en yakın Schneider Electric distribütörünü kolayca bulun.
Yardım Merkezi
Tüm ihtiyaçlarınız için destek kaynaklarını tek bir yerde bulun.
