How can I see the current on the main display on the ATS22?
Issue:
Display configuration on ATS22
Product Line:
Altistart 22, ATS22
Environment:
All models
Cause:
Display only shows RUN
Resolution:
With Run, ACC or DEC on the display, push the Enter button (ENT). You should see LCr1. Push Enter again to see the current for Phase A. Escape back to LCr1 and scroll down to see Phases B (LCr2) and phase C (LCr3).
Total current on all three phases is not available. You can only see the individual current values for each phase.
Display configuration on ATS22
Product Line:
Altistart 22, ATS22
Environment:
All models
Cause:
Display only shows RUN
Resolution:
With Run, ACC or DEC on the display, push the Enter button (ENT). You should see LCr1. Push Enter again to see the current for Phase A. Escape back to LCr1 and scroll down to see Phases B (LCr2) and phase C (LCr3).
Total current on all three phases is not available. You can only see the individual current values for each phase.
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。