Until SoMachine V3.1 / VJD 6.1 it was possible to connect Remote PLC to an OPC Server by using the remote HMI as Gateway.
With VJD 6.2 SP 2.x this was not any more working, because of an issue inside the VJD runtime.
But in VJD 6.2 SP3 it is fixed and can be used again.
With VJD 6.2 SP 2.x this was not any more working, because of an issue inside the VJD runtime.
But in VJD 6.2 SP3 it is fixed and can be used again.
發佈於:施耐德電機Taiwan
