What will cause a CLr fault on the ATV212?
Issue:
Getting a CLr fault on the ATV212.
Product Line:
ALTIVAR 212
Environment:
All models
Cause:
Troubleshooting
Resolution:
CLr [Reset active] is a status which is displayed after the STOP/RESET key is pressed while a detected fault is displayed. It indicates that the cause of the detected fault has cleared and the fault status can be reset. Press the STOP/RESET key again to clear the detected fault. This type of fault reset only applies when in Local mode or in Remote mode with CMOd=1 ( HMI ). It also only applies to the following faults:
Getting a CLr fault on the ATV212.
Product Line:
ALTIVAR 212
Environment:
All models
Cause:
Troubleshooting
Resolution:
CLr [Reset active] is a status which is displayed after the STOP/RESET key is pressed while a detected fault is displayed. It indicates that the cause of the detected fault has cleared and the fault status can be reset. Press the STOP/RESET key again to clear the detected fault. This type of fault reset only applies when in Local mode or in Remote mode with CMOd=1 ( HMI ). It also only applies to the following faults:
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。