CONEXT SW+ inverter shows 'F0 is too hot and has shut down. See guide', Please suggest a solution?
Hello,
The CONEXT SW+ would have been overloaded and got too hot and just shut down. There is no documentation for the F0 fault but it appeared before at other sites that may have been due to overload.
We suggest you to check the possibility of over loading on CONEXT SW+ and try to reduce the load. You can allow some time for the inverter to cool down and restart again.
The CONEXT SW+ would have been overloaded and got too hot and just shut down. There is no documentation for the F0 fault but it appeared before at other sites that may have been due to overload.
We suggest you to check the possibility of over loading on CONEXT SW+ and try to reduce the load. You can allow some time for the inverter to cool down and restart again.
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。