Does Logo smart relay from Siemens communicate with a Harmony HMI?
Issue:
Looking for a driver in VIjeo Designer or EcoStruxure Operator Terminal Expert that can communicate to LOGO! Smart Relay from Siemens
Product Line:
Harmony, Magelis, Vijeo Designer, EcoStruxure Operator Terminal Expert
Resolution:
Today, none of the Harmony or Magelis HMI's are able to communicate to a Siemens LOGO! Smart Relay. We currently only support communication to Siemens LOGO! PLCs. The recommendation is to verify with Siemens if the smart relay is able to communicate with Modbus TCP/IP or Modbus RTU. If so, then our HMIs could use the Modbus protocol to communicate to this relay.
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。