NMC3 - Firmware downgrade from v2.x+ to v1.x not supported
Problem:
Users wish to downgrade firmware from v2.x+ to v1.x
Product Line:
Network Management Card 3 - Including (but not limited to) AP9640/41/43
Environment:
NMC3's with firmware v2.x+
Cause:
NMC firmware v2.x provides support for new TI PHY hardware. Older versions of the firmware (v1.6.x and below) will not work with the new hardware. Firmware version 2.0.x and higher works with the old hardware.
Solution:
Once upgrading to v2.x+, it is no longer possible to downgrade back to v1.x.
Users wish to downgrade firmware from v2.x+ to v1.x
Product Line:
Network Management Card 3 - Including (but not limited to) AP9640/41/43
Environment:
NMC3's with firmware v2.x+
Cause:
NMC firmware v2.x provides support for new TI PHY hardware. Older versions of the firmware (v1.6.x and below) will not work with the new hardware. Firmware version 2.0.x and higher works with the old hardware.
Solution:
Once upgrading to v2.x+, it is no longer possible to downgrade back to v1.x.
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。