How to upgrade your NMC2 & NMC3 firmware using the NMC Firmware Update Utility
Issue:
The customer asked how to upgrade the firmware through the utility tool.
Product line:
NMC2, NMC3
Environment:
AP9630, AP9631, AP9640 & AP9641
Cause:
Web interface displays a UPS "not recognized" error or the customer is installing a new NMC.
Resolution:
Please follow the next steps.
1. Access the Downloads page.
2. Locate firmware for the product by NMC model (ie AP9630).
(NOTE: Some products' firmware is not available on the download page. Contact Technical Support for support on products not found on the firmware download page.)
3. Run the application and enter the following information.
- Host (Ip address of the unit)
- UserName and Password of the NMC
- Click on Start Update
If you notice that the application stops with the selected protocol (SCP for this case) please try with FTP.
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。