How to change the temperature scale of an APC Network Management Card
Issue:
How to change the temperature scale of an APC Network Management Card
Product Line:
AP9619, AP9618, AP9631, AP9635, AP9635CH, AP9641, AP9643
Environment:
APC Network Management Card with environmental monitoring.
Resolution:
A customer may want to change their set temperature scare from Celsius to Fahrenheit and vice versa. This can be dependent on different factors such as policies or standards, ease of use, or just basic preference.
APC by Schneider Electric values this and takes in mind on our Network Management Cards.
You can change the temperature scale of an NMC depending on the firmware revision and/or the NMC model :
On NMC Generation 1 (AP9619, AP9618) or NMC Generation 2 (AP9631, AP9635, AP9635CH) with firmware 5.X.X, you can change this by clicking at Administration, then General, and then Preferences.
On NMC Generation 2 (AP9631, AP9635, AP9635CH) with firmware 6.X.X and above and NMC Generation 3 (AP9641, AP9643), you can change this by either selecting a LOCAL user and configuring it individually or this can be set proactively at the default user configuration settings.
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。