How to View a Geo SCADA DNP3 Device Profile
When Geo SCADA is installed, it creates a folder where it places several DNP3 Device Profile documents. These DNP3 Device Profile's are documents that describe Geo SCADA's DNP3 capabilities and settings with regards to DNP3 Master and Slave functionality.
The DNP3 Device Profile documents for Geo SCADA are found in the following directory:
C:\Program Files\Schneider Electric\ClearSCADA\InteropDocuments
They consist of the following .xml files:
To view these files, a user must perform the following steps in Microsoft Edge:
1) Open Microsoft Edge, click on the 'Ellipses' button (top right) and select 'Settings'
2) On the next screen, select 'Default browser' (left side of screen)
3) Set 'Allow sites to be reloaded in Internet Explorer mode (IE mode)' to 'Allow'. Click the 'Restart' button if it appears.
4) Drag the .xml file (I.E. Geo SCADA Expert DNP3 Master Device Profile.xml) onto a new tab in Edge. The page should appear blank.
5) Again, click on the 'ellipses' button (top right) in Edge. Select 'Reload in Internet Explorer Mode'.
6) The DNP3 Device Profile should now be displayed properly.
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。