NetBotz logging level reset to "Warning" after 5.5 upgrade
Issue:
NetBotz logging level reset to "Warning" after 5.5 upgrade
Product Line:
NetBotz
Environment:
NBRK0750
NBWL0755
Upgrade to Firmware Version 5.5
Cause:
By design, upgrading NetBotz to version 5.5 will cause logging levels to be switched to "Warning" no matter what the previous setting was.
Resolution:
Due to additional logging information that may be stored locally or be sent to a Syslog server, it was decided to set logging to warning so there would not be too much information logged.
If a different level is required, you will have to change it back to the previous setting manually after upgrade.
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。