What could cause a M580 safety PLC safe task to come up in STOP mode after a power cycle?
Issue:
possible cause of M580 safety PLC safe task to come up in STOP mode after a power cycle
Product Line:
M580 Safety PLC, Ecostruxure Control Expert
Resolution:
One possible cause of the safety Task to come up in STOP mode is if the "support quantum remote drops" option in the processor configuration is selected and there is no Quantum drop configured in the project
Uncheck the "Support Quantum Remote drops" option in the processor configuration. This is would be an offline change and thus require a project download to the PLC.
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。