How do I perform a “Cold Start” on a Smart‑UPS SURT15KVA or SURT20KVA?
Issue:
Product Line:
Smart-UPS SURT15KVA and SURT20KVA
Environment:
All serial numbers.
Resolution:
There are some instances that the UPS may refuse to turn on even though it is plugged into the AC outlet. It could be that the UPS does not like the power it is getting. In this case, we can apply the Cold start procedure.
To perform a Cold Start on a Smart-UPS SURT15KVA and SURT20KVA , you may follow the procedure below:
- Make sure that the UPS is completely off and there is no AC input.
- Make sure the battery is connected (see image below, Figure A)
FIGURE A:
3. Ensure that the Power View display is also connected (see image below FIGURE B:)
FIGURE B:
4. Push and hold the “On” button on the UPS, located on the front panel or rear panel, and release it once the PowerView display responds or indicates a light (See images below "FIGURE C and D" to locate the Cold Start button).
FIGURE C:
FIGURE D:
5. Go to the Control Panel or the Power View display to activate the UPS or to power the load using the battery source (There will be output voltage while the UPS is running on battery ). See below FIGURE E:
FIGURE E:
See the Manual as well for your reference.
Should you encounter any issues or need further assistance, please contact our customer care center at https://www.apc.com/us/en/support/
發佈於: 施耐德電機Taiwan
需要協助？
產品選型工具
快速輕鬆地為您的應用找到合適的產品和附件。
取得報價
立即線上提交您的銷售需求，專業團隊將主動聯繫您。
購買地點
輕鬆在您所在地區找到最近的施耐德電機經銷商。
支援中心
在同一位置找到滿足您所有需求的支援資源。