How to program my smart receiver? GHACR, GHAFR or GHAFRES

Question

Accepted Answer

Please make sure that you have the correct components.

Smart receivers will have the part references GHACR, GHAFR or GHAFRES
Smart controllers will only have 4 channels and have part references GHAPT for a remote controller or GHAWT for a wall controller.

Any controllers being used to reprogram the system must be set to dimming mode before the programming procedure can be carried out.
Please refer to pages 19-23 of the attached instructions for further details.

How to program my smart receiver? GHACR, GHAFR or GHAFRES

Note: The Smart Wireless Dimming System has been discontinued

Released for: Schneider Electric UK

Products

Support

Company

Quick Links

Partners

Sustainability

Events

Insights
opens new tab

How to program my smart receiver? GHACR, GHAFR or GHAFRES

Note: The Smart Wireless Dimming System has been discontinued

Released for: Schneider Electric UK

Products

Support

Company

Quick Links

Partners:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Sustainability:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Events:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Insights:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}opens new tab

Partners

Sustainability

Events

Insights
opens new tab