Issue:
What is the proper procedure to follow when removing a GV manual starter from DIN rail?
Product Line:
IEC Manual Starters
Environment:
TeSys GV-Line
Cause:
Product Maintenance
Resolution:
To remove a GV manual starter from DIN rail the following steps must be followed while facing the front of the device where the terminal markings can be read.
1. With both hands, grip both the sides of the device placing the finger-tips over the top and thumb-tips underneath.
2. Firmly press the device downward towards the floor.
3. While firmly pressing the contactor downward towards the floor, pull the bottom end of the contactor outward, away from the DIN rail.
What is the proper procedure to follow when removing a GV manual starter from DIN rail?
Product Line:
IEC Manual Starters
Environment:
TeSys GV-Line
Cause:
Product Maintenance
Resolution:
To remove a GV manual starter from DIN rail the following steps must be followed while facing the front of the device where the terminal markings can be read.
1. With both hands, grip both the sides of the device placing the finger-tips over the top and thumb-tips underneath.
2. Firmly press the device downward towards the floor.
3. While firmly pressing the contactor downward towards the floor, pull the bottom end of the contactor outward, away from the DIN rail.
Released for: Schneider Electric USA
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.
