Issue:
Engineering drawing PBA711 shows Depth of MH**WP box as 6.25",  and the 176 Digest lists the MH**WP panel box as 6.5"D , which is correct?

Product Line:
NQ Panelboards

Environment:
Plant Engineering drawings

Cause:
Clarification of Plant Engineering drawings

Resolution:
The 6.25"D represented on Drawing PBA711 is correct if measuring from inside backbox to the inside of the front trim.
The Digest 's 6.50" D represents measurements taken from the outside back of the box to the outside Trim/Door , thus the .25" Depth discrepancy.

Released for: Schneider Electric USA