Issue:
User would like to know what the default settings are for the serial port on a Link150 Gateway.
Product Line:
Link150 (EGX150)
Environment:
Ethernet Gateways
Cause:
User may want to configure his daisy chain of devices to match that of the default settings for the Link150
Resolution:
See table below for Serial Port Settings
| Description | Settings |
| Mode | Master |
| Physical Interface | RS-485 2-Wire |
| Transmission Mode | Automatic |
| Baud Rate | 19200 bps |
| Parity | Even |
| Stop bits | Auto |
| Termination | Enabled |
| Biasing | Enabled |
| Response Timeout | 3 seconds |
| Remote Device Connections | Feature used only for Link150 in slave Mode |
| Port | 502 |
Documentation: EcoStruxure Link 150
Released for: Schneider Electric USA
