Issue:
Identify the steps to connect a wireless push button to a receiver.

Product Line:
Wireless pushbuttons

Environment:
Push Buttons and Operator Interface

Resolution:

1. Hold down TOP BUTTON for three seconds
   1. Result is that Q1 LED will flash
2. Press TOP BUTTON momentarily until output that needs to be controlled is flashing
   1. Either Q1 LED or Q2 LED will be flashing
3. Press BOTTOM BUTTON once (momentarily)
   1. Flashing LED will slow down
4. Press Transmitter button three times
   1. SIGNAL LED will light up for five seconds indicating button is successfully paired

Released for: Schneider Electric USA